Give the concrete a decent scrub with a stiff bristle brush to get rid of any dust or dirt.

Open any windows or garage doors for ventilation.

Use Thompson's Oil & Drive Cleaner to give the concrete a good clean before application.

For existing oil or grease stains, use this neat.

Make sure any cleaners are rinsed off the concrete & it's dry before applying One Coat Concrete Seal.

On cold & damp days, drying and re-coat times will take longer.

For best results, use on a dry day above 10C. Give the tin a good stir.

Pour the tin into a roller tray and use a long pile roller to apply in long smooth strokes.

If you're sealing your garage floor, start from the furthest point and work towards the door - don't seal yourself into a corner! Apply an even coat, making sure that any puddles are spread into dry areas.

It's just one coat, so that's it, job done! FYI - For more porous concrete you might need to apply another coat after 4 hours.

Clean your equipment with white spirit.